|
Re: Tbi swap build thread
Quote:
Originally Posted by jasons
Thanks RF. I was thinking around 30 Ohm would be needed. I'll get a resistor to add and post the results.
|
22, 27 and 33 Ohms are standard values per E12 (10%) series resistors.... Use 2 Watt Allen Bradley resistors if you can..
//RF
__________________
"The Beast"
1975 Chevrolet C20 longbed
350/ 700R4! with 3inch body lift
Dual Flowmasters Super 40's!
TBI retrofit completed (2007-07-29) 
New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)
|