[Robznob11]

I probably went as mid grade as you can go disc swap from doner, 4/6 drop with springs and spindles, drop shocks relocators and delux panhard bar, drop trailing arm member (not needed) . Then i cut the frame between steering box and core support brackets dropped the horns 3 in,relocated cab mounts on frame raised floor 2 in in the center,flipped the bed brackets, gained a 3 " body drop. Front bumper is 5" off floor rear about 8" with tall tires. Now if i did a notch added a block in the rear and installed bags aired out id be close to the dirt. Also where im at now is at the verge of trimming front fenders and aftermarket hood hinges. Its going to be close if i go larger on tires deffinatly!
Posted via Mobile Device