We have finally gotten the outer rockers installed. We got different doors from a fellow forum member; mine were half filler that I got with the truck. Got them soda blasted, finished our other work and got to the rockers. The fun part on the driver's side was that the inner rocker I bought from Classic Parts of America was about 1.5" shorter on the front side than the back. We had to fabricate a piece and weld it on to the inner rocker to get the necessary length to be able to weld the outer rocker to it. Here is the driver's side.
[ATTACH]
[/ATTACH]
On the passenger side it was no fun at all. The PO cut off both the inner and outer rockers and attached a new outer rocker with filler. He apparently drove it that way for a while so when we put our new outer rocker on we were about an 1" off length wise. It turned out that since the floor was so full of cancer and the rocker was held on with filler the passenger side relaxed about 3/4 of an inch. We had to pull the door pillars together and then weld a brace in to get the cab back in shape. Once we got through that, it was pretty smooth sailing. Just had the normal adjustments to get the parts to fit. Here is how it turned out.
For any other newbies out there that read this, BRACE YOUR CAB BEFORE YOU CUT ANYTHING!