The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

gonebad2 · 11-18-2003, 09:44 PM

I installed one from Billet Specialties. Pretty close to the same product. Install went pretty easy. You will need an adapter for your turn signal harness. They one they supply is flat. GM has the adapter. You will need only one "U" joint and a section of Doudle "D" shaft. Do yourself a favor and get the "U" joint that has the vibration dampner built in. At first I didn't and changed it out soon after. The install is pretty straight forward. You can use all of the original GM column mounting brackets. Good Luck To you...Greg

11-18-2003, 09:44 PM	#2
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	I installed one from Billet Specialties. Pretty close to the same product. Install went pretty easy. You will need an adapter for your turn signal harness. They one they supply is flat. GM has the adapter. You will need only one "U" joint and a section of Doudle "D" shaft. Do yourself a favor and get the "U" joint that has the vibration dampner built in. At first I didn't and changed it out soon after. The install is pretty straight forward. You can use all of the original GM column mounting brackets. Good Luck To you...Greg __________________ Your Bought And Sold....I Got Your Soul!