[logansdad]

been a while since I posted anything new so here's some pics of rocker replacement. I had ordered the rocker for the 3rd door but was on back order. Good thing that one was in the best shape. I found out the drivers side rear quarter wasn't replaced, it was recapped for a lack of better term. Right at the horizontal roll off the door handle the quarter stuck out over 3/8".
I took the plasma cutter and cut a horizontal line only after removing the spot welds in the door jam and took the raised quarter down to fitting the door. I can't wait to strip that down to bare metal and see where else it is seemed together.