Quote:
Originally posted by 383drvr
I can do some fabbing, I've got a stick welder, cutters, etc. Its no TIG or MIG, but I can make good welds. I just dont have benders or other fabbing tools.
I want to drive it daily, but also be able to deflate the system and have it down low; (not lay frame, but like a 5/7-6/8 drop), If this is possible. I'm maily looking for a nicer/smoother ride. The stock springs are far too stiff. I dont mind saving for an air system rather than spending alot on a good drop.
I've heard the estimate of 1500 for a system. Is that for the lowest/ easiest system, or for a decent, full system?
Thanks! 
|
We used a stick welder to do the entire rear link setup and step notch on my 83 and it put out good welds.
You can always limit your suspension by using a longer bumpstop.