|
Re: C-10 question
-
Welcome to the board. First off I agree with CC69Rat to leave the six in it for now. When and if you decide to go the V-8 route it will bolt to the bell housing fine. That will put the distributor pretty close to the firewall but it will fit. You can go with the divorced coil HEI for more clearance if you want though. You will need to replace the six cyl frame mounts with V-8 ones as they are different, and the radiator for the six is only a 2 core radiator, so I would go with at least a 3 core. Drive line would remain the same.
LockDoc
|