|
Re: One man truck box removal and reinstall (tuitorial)
Quote:
Originally Posted by ecgate
Do you have a one man cab removal tool also?
|
Funny you should ask. 
The same "tools" do that too. Just make sure you extend the beam out enough so the legs of the hoist don't get in the way of the tires when you roll the frame out. (it's ok to turn the wheels a little on truck to clear)
Note the engine block and transmission on the back of the hoist. This was needed due to the beam being extended so far but worked perfectly. RED NECK INGENUITY!
"No cabs or boxes were harmed in the making of this guide"
__________________
Bob
63 Impala 283/PG/3.36 (under restoration)
66 Impala 327/PG/3.36
66 Chevelle SS 409/M22/3.55
69 Chevelle 307/PG/3.08 (future restoration)
69 C10 short stepside 454/TH350/3.73
69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!)
71 Cheyenne 20 fleetside 350/4 spd/4.10
71 Chevelle 6/PG/3.08
72 Chevelle 454/M21/4.10
Last edited by bobs409; 05-02-2013 at 06:42 AM.
Reason: fine tuning...
|