The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 72 lwb ongoing project (my 1st build thread/1st old school)

fapfap72 · 05-02-2013, 06:42 PM

just to clarify, Ron Francis fuse panels are front loading, and no wire will be ran thru this firewall point behind the motor, it will all come out at the bottom and sides of the panel and run in braided covering or loom leashed down and cleanly ran over the steering column out of sight and wires for the engine will go through the firewall hole cover, which has two 1" grommets and does not come with the kit but costs 17 bucks and was thrown in free with my kit

05-02-2013, 06:42 PM	#46
fapfap72 Registered User Join Date: Jan 2013 Location: Lewisville, TX Posts: 81	Re: 72 lwb ongoing project (my 1st build thread/1st old school) just to clarify, Ron Francis fuse panels are front loading, and no wire will be ran thru this firewall point behind the motor, it will all come out at the bottom and sides of the panel and run in braided covering or loom leashed down and cleanly ran over the steering column out of sight and wires for the engine will go through the firewall hole cover, which has two 1" grommets and does not come with the kit but costs 17 bucks and was thrown in free with my kit Attached Images __________________ 72 lwb rat, 305/400, pb, ps, tilt Build Thread "I'm gunna be honest I don't know anything about tracking chickens, I just did it for the free liquor. But I'm tellin ya I heard that chicken"