The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

NoNeck · 05-05-2013, 10:17 PM

Keith, I bench bled the Master Cylinder like in the photo you supplied. That's the same way I have always bench bled regular MCs. It pushed plenty of fluid through the clear bleed lines and I was able to get all the air out of it. For some reason, now that it is mounted (with a booster) there is no fluid coming from the ports.
I'm stumped...

POP

05-05-2013, 10:17 PM	#6
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Wilwood Master Cyl question Keith, I bench bled the Master Cylinder like in the photo you supplied. That's the same way I have always bench bled regular MCs. It pushed plenty of fluid through the clear bleed lines and I was able to get all the air out of it. For some reason, now that it is mounted (with a booster) there is no fluid coming from the ports. I'm stumped... POP __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.