[midniteblues]

yep the bed is still here currently in my yard filled with scrap so i dont have any pics of the floor rite now.

lil' info on it

this was on my 67 when i bought the truck so its had the second too last rear crossmember underneath trimmed to fit a 67-72 frame it has the tail lite harness still attatched to plug rite into the oe 67-72 harness an all the lights worked.4 hockey pucks were used as rubber mounts/spacers between frame and bed witch lined it up great with the body the orginal bolt holes in the bed lined up with the 67-72 bed mounts on the frame an i still have the pucks n bolts that were used.

the bed is painted a satin black idk what kinda paint is on it but i'll tell ya its tough too scratch an it dosnt look bad at all if black is your thing.

since this was a big tub stitting useless in my yard all the scrap i generated over the winter got loaded into it but i gotta say the crap wasnt tossed in it as to damage anything.

now onto the damage....well its got a few small dents but they are very minor no bigger than a half dollar.it has the leftover snaps from a tonno cover that must've been on it at one point in time. and the worst part of the bed is the dr side front step is missing a panel between the cab and bed its really not visable when the bed is mounted but you wouldnt wanna use that one to bare body weight on it without fixing it because it would flex too much this peice looks very easy to make.

the good thing about it is theres not one speck of rust on it besides the rust dust dripping from the crap that just wipes off that paint.it lines up good with the body and because it came off my truck its a direct plug n bolt on.