|
Re: Wilwood Master Cyl question
Quote:
Originally Posted by NoNeck
.. If you use the "Depth Correction Plug" with the shorter pushrod "C" it's the exact same length as "B".
POP
|
Ok, .. so can we try it with the plug? I am reading about 'the Pin doesn't seat correctly with the Wilwood MC' .. 'Once I installed the plug..' Etc.
I just have a feeling we're not putting enough pressure on the MC to push the fluid out of the ports. We know fluid will come out because you bench bled it. Why won't it come out now? It's either stopped up with something or we're simply not pushing it hard enough. I think the larger diameter of the plug doing the actual pushing and the pin pushing the plug just might give us a different result.
Worth a try.
__________________
Chad
1967 C10 SWB - Project Savannah - 6.0/4L80 *Currently underway*
1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy
1986 Silverado Short Fleet - Scarlet *Sold*
1985 Silverado Short Fleet *Sold*
2022 Jeep Gladiator Mojave
2001 Jeep Cherokee XJ 4x4 - Lifted, Built
1992 Jeep Cherokee XJ 4x4 - Lifted
2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)
|