The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**TJ's Chevy** · 05-13-2013, 05:34 PM

There are hopped out 283 v8s out there( I have seen them) just not to many because if you go with a larger cubic inch motor you can get the same power or more instead of spending alot of money hopping up a small cubic inch motor. You could get a 4 barrel intake manifold and put a 600 cfm edelbrock on there with headers and an hei and that would make a big difference in performance. Or just go with a larger cubic inch motor and get a ton of power.

05-13-2013, 05:34 PM	#9
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,399	Re: Has anyone tricked out a 283 There are hopped out 283 v8s out there( I have seen them) just not to many because if you go with a larger cubic inch motor you can get the same power or more instead of spending alot of money hopping up a small cubic inch motor. You could get a 4 barrel intake manifold and put a 600 cfm edelbrock on there with headers and an hei and that would make a big difference in performance. Or just go with a larger cubic inch motor and get a ton of power.