The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

'65 chevy lover · 05-18-2013, 11:23 PM

Have a question about ride height. The plan was to use 2 1/2" drop spindles on the front and, nothing on the rear. Now, I'm thinking about besides the drop spindles, I'm going to get two more inches with drop springs plus, going with two inches on the rear. Question is, will I have any problems with wheel clearance in front and, will the drive shaft be OK as far as pinion angle? Thanks for any help.

05-18-2013, 11:23 PM	#1
'65 chevy lover Registered User Join Date: Apr 2011 Location: Ft. Worth, Tx Posts: 536	Ride height question Have a question about ride height. The plan was to use 2 1/2" drop spindles on the front and, nothing on the rear. Now, I'm thinking about besides the drop spindles, I'm going to get two more inches with drop springs plus, going with two inches on the rear. Question is, will I have any problems with wheel clearance in front and, will the drive shaft be OK as far as pinion angle? Thanks for any help.