|
Re: Rear Wheel Bearing Problem
It doesn't sound like you are getting the spline on the axle to slip into the spider gears.
Are the spider gears in the correct position?
You may have to turn the axle a bit and grab the top of the flange with your thumbs and pull back with your thumbs while you push in at the bottom with your fingers to lift the splined end slightly to get it to line up with the inside of the spider gear.
__________________
Founding member of the too many projects, too little time and money club.
My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
|