Quote:
Originally Posted by DeadheadNM
Thanks a lot. I have the routing per the assembly manual just hoping to get pics for the shop guys to make the install easier and correct. The route you describe across the rad support sounds identical to that for one of the aux battery wires. Any pics of a camper harness power wire course across the firewall would help. What I need most is to know where the camper wire ties into the aux battery harness - maybe on one of the two J-blocks on the RH fender (aux battery uses 2 on the RH fender)? I don't want the power turned on and wires start melting under the hood because of an improper install or unnecessary holes drilled into the sheet metal. Appreciate your help!
|
I was finally able to get some pictures of the under hood camper harness installation in my 69. This is the original and was not removed when I disassembled the truck. I only coiled the hot wire and zip-tied to the firewall. It is installed exactly as it was when the truck was new. I'm not sure how this would vary with the dual battery setup. The pictures trace the route from the junction block on the right fender to where it joins the additional wires for the rear lights and drops down the firewall to the bottom of the cab.
I'll probably have to post the pics in 2 posts.
Hope it helps.
Jim