View Single Post
Old 05-26-2013, 09:19 PM   #2
G&R's57GMC
Senior Member
 
G&R's57GMC's Avatar
 
Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,624
Re: 54/S-10/Square Body!

Try your darnedest to get a title and register the 54 before you start the build.

Using the 87 vin would not work as the only thing 87 would be the vin.

The S-10 chassis would need a title and vin and then the 54 would be titled as a S-10.

So find a total junk 54 with a title and get it in your name and registered, then start your build with the S-10 chassis and you original 54 body. Now the tricky part the vin tag.

The factory uses a special rivet that you can't duplicate to hold the vin tag on the body. This could pose a problem if an official were to inspect the vin for whatever reason, and this could create a real problem for you.

On the other hand if the vin plate was spot welded by the factory this could be glued to the body with structural adhesive .

Good luck
__________________
Glen & Jane's Rides
‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008
7 other cars & trucks , 5 trailers
'56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020
’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020
My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275
G&R's57GMC is offline