[Burbaholic]

I had already worked out the mountings for the first two rows of seats so it was time to start on the 3rd row. I wanted to keep them removable as they were in the Buick Enclave. For those of you just jumping in here, I bought the entire interior from a 2012 Buick Enclave with 700 miles on it.

The front mounts hooked over a rod and then the back were bolted through the floor.

After some head scratching, I decided to modify some recessed cargo tie-downs to use as the front mounts. This would keep a flat floor after the seats were removed.

First pic shows the 2-piece 3rd row set-up and the second pic shows the front mount that slide over the rod.