Quote:
Originally Posted by Claytona08
Oh ok, The instructions told me to put 50-55psi @ 90 degrees. I wasn't sure on what to do to be honest. I'll give it a try this evening.
|
That is correct 50-55, but that means when the compressor is on the pressure should be about 50-55.
When i said bypass the switch....I meant taking a wire and disocnnectinng the switch form the accumulator and bypassing the plug. should have 12v at one of the wires on the connector. take volt meter and one lead to ground and the other to one of the pin on the connector and should read about 12v...