The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

nvrdone · 06-20-2013, 02:13 PM

Who says you can't have power brakes with a manual trans ? I have a 327 / m21 with power drum brakes front and rear.
I used a bracket from no limit - pn -pbc 47 with a 79 mustang booster and m/c. I did have to use a 10# check valve in the front. The stock clutch and brake pedals work good along with the stock manual clutch linkage. The only clearance issue was the cross member under the rear of the trans. I had to use a tube mount instead of the stock square mount.
Posted via Mobile Device

06-20-2013, 02:13 PM	#7
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,506	Re: 51 Chevy truck brake questions. Who says you can't have power brakes with a manual trans ? I have a 327 / m21 with power drum brakes front and rear. I used a bracket from no limit - pn -pbc 47 with a 79 mustang booster and m/c. I did have to use a 10# check valve in the front. The stock clutch and brake pedals work good along with the stock manual clutch linkage. The only clearance issue was the cross member under the rear of the trans. I had to use a tube mount instead of the stock square mount. Posted via Mobile Device