|
Re: Motor Mounts Problems - Putting in a 78 350
Quote:
Originally Posted by padresag
by frt motor mount are you talking frt timing cover area?. if you are installing a 350/350, you require the 2 side mounts on the side of the eng block and the one under the rear of the trans.
those perches shouldn't be welded in. it removes the possibility of being able to move them like I suggested, but is easier to install if it works
ron
|
On a 62, there is a horseshoe motor mount that goes under the harmonic balancer. I read that if you have a torsion bar setup that you need this mount or the lower water pipe bolt will get bent.
Posted via Mobile Device
__________________
Current Vehicles:
'62 C10 - 350 (current project), '03 Tahoe (C Series)
Some Past Projects:
'69 Nova - 350 , '70 1/2 Camaro Z28 - LT1 350, '73 K20 Full-time 4x4 - 400 SB, '77 1/2 Camaro Z28 - 350, '84 Camaro Z28 - 305, '68 Buick - 430 BB
|