|
Re: Motor Mounts Problems - Putting in a 78 350
orig on your truck y6ou had the horseshoe mount on the frt and the side mounts off the bellhousing. that gave you 3 point mounting which is what you require. now if you have the side eng mounts and perches and the rear trans mount you will have a 3 point mounting which is what you require. forget about the horseshoe mount - not required.
the motor should be in exactly the same position unless you screwed up putting(welding in) in the side perches
if you don't get it show us some pictures of your mounting so that we can see what you have done
ron
|