View Single Post
Old 07-02-2013, 08:22 PM   #14
GhostTown
Registered User
 
GhostTown's Avatar
 
Join Date: Feb 2011
Location: Idaho
Posts: 305
Re: upper trim clips

As you can see in these close up pics, the upper trim really has some issues. In the first two pics you can see how it dips down on the front fenders rather than following a straight line down the length of the Blazer. That bugs me a little.






In several spots on both sides of the rig the double sided tape is giving up.



You can see the one exposed screw at the front of the door trim piece. I hope to hell this was how the factory would have done it, had they did it.




In one or two spots it looks like there is a hidden screw, but it's a little loose.




Here is where I'm guessing the PO shortened upper trim from a pickup. I wouldn't imagine this being cut and spliced together from the factory.




It all shows well enough from a distance, but I really want to get the trim polish and painted, then correctly installed. Everything is so new that the upper trim in it's present condition sort of detracts from the whole thing. If nothing else, it bugs me.

GhostTown is offline   Reply With Quote