The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Clarance J · 07-07-2013, 02:46 PM

Hello vht. I'm in the middle of my rebuild and I included a tilt front end just for the reason you said. The motor is low in the engine compartment and its hard to reach, hence the tilt. There is really not much out there on tilts so its my own design. Still not complete but Clarance J is on the street so he's at the build as I go stage. I haven't updated for awhile so my rebuild is on page 3 or 4 back in the pile. "Just another old truck" by Clarance J. Take a look and see what you think.

Earl aka Clarance J

07-07-2013, 02:46 PM	#4
Clarance J Registered User Join Date: Feb 2013 Location: Grants Pass Oregon Posts: 474	Re: Tilt front ends? Hello vht. I'm in the middle of my rebuild and I included a tilt front end just for the reason you said. The motor is low in the engine compartment and its hard to reach, hence the tilt. There is really not much out there on tilts so its my own design. Still not complete but Clarance J is on the street so he's at the build as I go stage. I haven't updated for awhile so my rebuild is on page 3 or 4 back in the pile. "Just another old truck" by Clarance J. Take a look and see what you think. Earl aka Clarance J __________________ You have to have patiences or you'll be one.