|
Re: Coil Spring Plates
I just went out and measured a rivet hole and it measures .41". I have been drilling them out to 7/16" and installing 7/16" (.4375") grade 8 bolts. A 10 mm bolt converts to .3937" so it may be decent in a .41" rivet hole but you don't want to have any slop in the hole because it will shear off easily on impact.
__________________
Dan <---(my name)
67 SWB C10 project "GEORGIA"- 59 Brookwood 2dr wag...Next project- 03 Tahoe 4x4 5.3 family ride- 07 Hondur Accord, commuter car
Last edited by 67c10rustbuket; 07-12-2013 at 08:19 PM.
Reason: add
|