The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

fastnloud · 07-14-2013, 05:17 PM

I had my 82 GMC Sierra lowered a few months ago. I used Western Chassis 2.5 inch drop spindles and DJM 2 inch drop springs up front and a western chassis flip kit in the rear, should be a 4.5/5 drop.

The truck sits an inch higher on the passenger side, now I've heard about the chevy lean but i wouldn't think it would be a full inch. My question is could bumpstops or shocks have anything to do with it? I think maybe the springs didn't give me enough drop as well.

Also, I'm looking to go lower, I want a set of 3 inch drop springs that will give me a true 3 inches of drop. Any suggestions?

Thanks guys.

07-14-2013, 05:17 PM	#1
fastnloud Registered User Join Date: Dec 2012 Location: USA Posts: 209	Lowered c10 leaning on 1 side... I had my 82 GMC Sierra lowered a few months ago. I used Western Chassis 2.5 inch drop spindles and DJM 2 inch drop springs up front and a western chassis flip kit in the rear, should be a 4.5/5 drop. The truck sits an inch higher on the passenger side, now I've heard about the chevy lean but i wouldn't think it would be a full inch. My question is could bumpstops or shocks have anything to do with it? I think maybe the springs didn't give me enough drop as well. Also, I'm looking to go lower, I want a set of 3 inch drop springs that will give me a true 3 inches of drop. Any suggestions? Thanks guys.