The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BR3W CITY · 07-20-2013, 05:59 PM

I have an extra set of the Russel EFI push connect fittings; but keep in mind that many have the OLD design, which uses a regular plastic center clip. These CAN and HAVE come off before under rail pressure. I had a return line fitting come off and pump fuel onto hot headers.

YOU NEED TO USE 644110 or 644120, these are the NEW design parts for 3/8 and 5/16 push on fuel fitting to -6 AN. Some have used the old style for a long time, but there has been more than 1 car lost to a fire caused by the fittings.
http://www.summitracing.com/parts/rus-644120/overview/
http://www.summitracing.com/parts/rus-644110/overview/

If you want the old style, you can have my set for the cost of shipping....but frankly thats at your own risk.

07-20-2013, 05:59 PM	#12
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Fuel line routing? I have an extra set of the Russel EFI push connect fittings; but keep in mind that many have the OLD design, which uses a regular plastic center clip. These CAN and HAVE come off before under rail pressure. I had a return line fitting come off and pump fuel onto hot headers. YOU NEED TO USE 644110 or 644120, these are the NEW design parts for 3/8 and 5/16 push on fuel fitting to -6 AN. Some have used the old style for a long time, but there has been more than 1 car lost to a fire caused by the fittings. http://www.summitracing.com/parts/rus-644120/overview/ http://www.summitracing.com/parts/rus-644110/overview/ If you want the old style, you can have my set for the cost of shipping....but frankly thats at your own risk. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD