The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What's better to weld C-notch: ARC or MIG?

*67Fleetsidedream* · 12-01-2003, 09:40 PM

If you have a small MIG machine this is what you can do to get good penetration.....Grind the edges of the cuts on both sides and then weld the peices together....Just a TIP...

12-01-2003, 09:40 PM	#7
67Fleetsidedream Wiseass secured himself a BAN Join Date: Nov 2000 Location: MOON!!! Posts: 2,282	If you have a small MIG machine this is what you can do to get good penetration.....Grind the edges of the cuts on both sides and then weld the peices together....Just a TIP...