|
Re: 76c10 to 65 c10 upper and lower control arms
Personally,... I would just buy some 63-70 conversion spindles (stock or drop) for $229.
Everyone sells them.
Steal the rotors and calipers off your '76 parts and just bolt them on.
Ok,... I lied.
I would not use ANY of your '76 stuff.
I would buy conversion spindles and then get NEW rotors, calipers and bearngs from my local auto parts store.
Use a 71-72 M/C and an aftermarket prop valve.
I can't help but type the same thing over and over.
But used 71-87 parts are WORE OUT!
Why re-use them?
|