|
Ignition help needed
Having an issue that maybe someone can help me with...
87, 305 TBI motor... Isn't getting fuel to the injectors.
Yesterday I ran the codes (none)
Checked pressure from the fuel pump (about 12PSI)
Checked fuses on the panel
I replaced the Ignition control Module this morning and it fired right up... drove it half a mile to a friends place, no issues...
Went to head home and it won't start again. Still no codes, pulled the control module off and checked the connections, all seems well...
Still not getting any fuel to the injectors...
I'm not sure where to turn next
Any help would be appreciated.
Cheers
Taylor
__________________
1987 R10
1976 K10
|