|
Re: Body Mount Kit
The tack welds didn't hold when I had to break loose the crusty nuts from underneath. I soaked the nuts & bolts for several days with Kroil too. Maybe I should've tried heating them first. When I cranked up the electric impact, just spun the whole nut & bolt.
What sucked was now I had to peel back my floor covering to get to the bolt heads.
8 rusty screws in the two sill plates. My original factory rubber floor mat, and the insulating/sound deadening material underneath had to be folded over to expose the bolt heads with the broken tack weld. Socket & breaker bar on top, impact gun on the bottom, unscrewed right off. I do not weld, so my bolts are not tacked down.
|