Parting out 72 402 engine
I have a fairly complete 1972 402 / turbo 400 combo out of a 72 cheyenne super 3/4 ton that I am going to part out. Truck is gone .... No Parts / Only engine parts. This was an old mans truck that had never been messed with
Both exhaust manifolds ....... $150.00 pair with some bolts and flanges, heat shield still on left manifold. ..... sold .... paid
Quadrajet carb .. 7042206 GA throttle shafts are stuck and rusty .....$75.00 ...... sold ........ paid
Air Cleaner for Quad .... Heat tube from exhaust to air cleaner gone. .....$ 40.00 ....sold .... paid
Carb Spacer , hose (junk) and elbow to valve cover ?? between hose and valve cover .... $50.00...sold ..... paid
Valve Cover , bolts and hold-downs ...... $40.00 .....sold ...... paid
BBC oil pressure line , engine half....... $35.00 with brass fittings from block out
Intake manifold ....... 72 dated $30.00 .......sold.... paid
oil pan ..... $45.00 ............ sold..... paid
Lower Alternator Bracket and rear bracket ......$35.00 with bolts ....... sold ....... paid
Power Steering pump with bent pulley and brackets that look OK ...... $75.00 with bolts / no resorvoir
Engine half of motor mounts and bolts ..... $25.00 ...... sold ...... paid
Lower crank pulley .... $45.00 with bolts
Water pump and pulley gone already
Most of the AC comp brackets ..... $100.00 with some bolts , compressor gone .....sold ....PAID
I also have the complete long block that was an 80k engine but has gotten water in it while setting ...... Its stuck , 1972 dated ........ $200.00 / No extras included ........REDUCED ....... $150.00 firm
I also have the turbo 400 trans that has been sitting ...... $100.00 worked but calling it a core.
Few small misc engine brackets and clips
6 spark plug boot shields .....sold ...... paid
Parts also advertised on Craigslist.
Add shipping to all prices . Dont like the price make an offer ..... all I can say is no. big items probably unshippable unless you want it bad enough. If paying with paypal or credit card add3%
I will try to post pics a little bit later
----------------------------------------------------------------------------------------------------------------------------------
This is what I have left at this point .......
BBC oil pressure line , engine half....... $35.00 with brass fittings from block out ..... REDUCED .... $20.00
Power Steering pump with bent pulley and brackets that look OK ...... $75.00 with bolts / no resorvoir .......REDUCED ...... $65.00
I also have the complete long block that was an 80k engine but has gotten water in it while setting ...... Its stuck , 1972 dated ........ $200.00 / No extras included ........REDUCED ....... $150.00
I also have the turbo 400 trans that has been sitting ...... $100.00 worked but calling it a core. ........ FIRM
Lower crank pulley .... $45.00 with bolts
Few small misc engine brackets and clips
Last edited by ksbrktracer; 08-19-2013 at 01:18 AM.
Reason: UPDATE ADD
|