|
Re: Steering column to Intermediate shaft -- 1" or 3/4"
I think I ran in to this same problem when I swapped my auto colum to manual. I think I wanted to use my orig. intermed. shaft and swapped the coupler. But I can't remember exactly. The shaft will collapse at least 4 or 5 inches once you get the plastic out of the pin hole, cause I shortened mine.
__________________
68' C20. 283CI w/55CC 305HO heads, NP435 Close Ratio, Corp. 14 bolt FF 3.21, 75' front end swap (everything but the X-member).
|