The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Want to Buy NP-205 to TH-350 Support Brace

BLAZERMAN · 12-04-2003, 12:10 AM

The only style I have seen on 67-72s are the 2 piece bracket that bolts to the transfer case and then to the frame with rubber donuts in between. I think I have a couple of the struts from the 73 up trucks, its a rod that goes from the 203 T/C to one of the hogshead bolts, These were used in conjunction with 2 strut rods that ran from the motor mounts on each side down to the special aluminum tranny dust cover.

12-04-2003, 12:10 AM	#2
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	The only style I have seen on 67-72s are the 2 piece bracket that bolts to the transfer case and then to the frame with rubber donuts in between. I think I have a couple of the struts from the 73 up trucks, its a rod that goes from the 203 T/C to one of the hogshead bolts, These were used in conjunction with 2 strut rods that ran from the motor mounts on each side down to the special aluminum tranny dust cover. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C Last edited by BLAZERMAN; 12-04-2003 at 12:12 AM.