|
Re: Engine Mount Questions
There are a couple ways to go. One is to use the motor mount brackets for a '67-'72 with a small block as well as the motor mounts themselves. You may or may not have to add a 1/4" or so spacer on top of the frame. My measurements show no spacer is needed. Others have said that a small spacer is needed.
The other option is to use the motor mount brackets from a '73-'87 C20 or C30. Those will fit the early frames better than the C10 brackets. There again a small spacer on top of the frame may be needed. Then you just use the '73 and up motor mounts, and then any upper bracket (clamshell) will work.
|