[legotech7]

It was a simple fix as suggested by mgchevyparts in a previous post. I used a small thin washer on both side of the MC and that pushed the MC forward a bit. The booster push rod had no adjustment to it and and it kept pressure on the MC causing the braked to drag and after a while they would lock up, so the simple fix seemed to have done the trick. I plan to upgrade the brakes to disk's soon and I will replace the booster then, but for now its working OK.... As long as I on here, does anyone know how to fix, other than replacing the speedometer? Mine is not working and the PO already replaced the speedo cable, nut still no speedometer. Hope this helps someone with the same issues and thanks again........