Quote:
Originally Posted by 1rudestude
It is easy even though there is more than one step and you do not even need to sand / media blast just scrape sand wire brush whatever you prefer all loose material ( less of a mess than sand/media blasting) vacuum out treat with metal prep clean with cleaner let dry and coat I like to use spray gun but you can use a brush . as long as there is no rot out it will last for ever if there is rot out they have a mesh for those that cannot fabricate and weld I do both so I simply make the repair and coat
I have seen metal treated with this stuff sit outside for years with no further decay. hope this helps
|
thanks think i got what i need...
Posted via Mobile Device