The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Tx Firefighter · 09-12-2013, 02:42 PM

As long as your control arm bushings are tight and not sloppy, you can align one at 3 inch spring drop. You'll have stacks of shims at each point, but it should align.
Posted via Mobile Device

09-12-2013, 02:42 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: drop spindle for 1" SD rotor??? As long as your control arm bushings are tight and not sloppy, you can align one at 3 inch spring drop. You'll have stacks of shims at each point, but it should align. Posted via Mobile Device