[Xeen]

Hey all;
Today I put together my own HD fuel pump wiring kit per Aeromotives specifications, and started installation, I didn't get completely done but I will finish it up tomorrow.
I got everything I needed at O'reilly including the 10ga wire they sell it by the foot.

The kit consists of the following items.
1) 1x 30amp, 12vdc automotive relay.
2) 1x 30amp, 12vdc circuit breaker.
3) 2x Blue Female Blade Connector.
4) 2x Yellow Female Blade Connector.
5) 5x Yellow Ring Connector for #10 Stud.
6) 1x Yellow Ring Connector for 3/8” Stud.
7) 1x 25ft 10ga. Red Wire.
8) 1x 3ft 10ga. Black Wire.
9) 6x 6 inch cable ties.
*Connectors required will vary per application.