The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

'63GENIII · 09-15-2013, 10:18 AM

IIRC, the shifter can accidentally be installed in the wrong position. I had a Clark 5 speed like that. If the "shift gates" ( where the end of the shifter crops into) were not in the right position when I put the shifter back in, it would do some strange things like you describe. Easy fix. Pull the shifter out and check to make shut that they are aligned.
Posted via Mobile Device

09-15-2013, 10:18 AM	#8
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Transmission Acting Wrong...??? IIRC, the shifter can accidentally be installed in the wrong position. I had a Clark 5 speed like that. If the "shift gates" ( where the end of the shifter crops into) were not in the right position when I put the shifter back in, it would do some strange things like you describe. Easy fix. Pull the shifter out and check to make shut that they are aligned. Posted via Mobile Device __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29