The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How to make a 1050 Dom list 8896 streetable

68 C-10 KID · 09-16-2013, 03:02 PM

Thanks Chris I will read up on this lead also. My 8896-2 had a horrible response lag and would not idle worth a darn. Or stay running.
I grabbed the old 8896 this is the old one non adjustable bleeds. So I put the AED blocks on adjusted the jets and installed the annular booster on the main body. Took out the 35 nozzles and installed the 31's. with some air screw adjustments it's much better than the 8896-2. Just a little richer on low end than I would like.
Posted via Mobile Device

09-16-2013, 03:02 PM	#30
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: How to make a 1050 Dom list 8896 streetable Thanks Chris I will read up on this lead also. My 8896-2 had a horrible response lag and would not idle worth a darn. Or stay running. I grabbed the old 8896 this is the old one non adjustable bleeds. So I put the AED blocks on adjusted the jets and installed the annular booster on the main body. Took out the 35 nozzles and installed the 31's. with some air screw adjustments it's much better than the 8896-2. Just a little richer on low end than I would like. Posted via Mobile Device __________________ 427 SBC 683HP & 590ftlbsTRQ @ fly wheel. 60'-1.38 1/4-10.43 MPH-124.6 New ET current 4/2019 AKA MEAN GREEN.