|
Re: 72 GMC Ignition problems
i would check to make sure you are hooked up to a hot ignition source, so if they tied into the old resistor wire for the old points or ran a new wire to the fuse box, to a ignition circuit
sounds like you are not getting any juice to the dizzy
__________________
Mike
72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider.
421 SBC / TH350 3000RPM Stall
Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks 
Last edited by bigmac73; 09-19-2013 at 11:16 AM.
Reason: add on, slow thinking
|