The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TxTan · 09-21-2013, 08:53 PM

I had this same problem last weekend while replacing the plugs and wires. I have a 72 with a stock 350, and the two front wires on each side were routed up through the engine mounts. There are two wire looms just above each engine mount. If this is what your dealing with I'll try to post some pics. I used some AC Delco wires from O'reillys ($36), and they fit perfectly with no alterations needing to be made.

09-21-2013, 08:53 PM	#19
TxTan Registered User Join Date: Sep 2013 Location: North Texas Posts: 43	Re: Plug Wire Routing I had this same problem last weekend while replacing the plugs and wires. I have a 72 with a stock 350, and the two front wires on each side were routed up through the engine mounts. There are two wire looms just above each engine mount. If this is what your dealing with I'll try to post some pics. I used some AC Delco wires from O'reillys ($36), and they fit perfectly with no alterations needing to be made.