No brake lights
To make a long story short, I put a nine inch in my truck with Explorer rear disc brakes. I took out the factory proportion valve and have the brake lines from the master cyl. directly to the lines for the front and rear brakes. I didn't know it until today but, I have no brake lights when I'm on the brakes. Does this have to do with not having the valve with the pressure switch? If so, how do I wire my brake lights to work? This is on an '87 R10 by the way.
Thanks,
Dave
Posted via Mobile Device
__________________
1987 R10 Pump Gas 496/TH375
Best 1/4 pass to date
60' 1.49
1/4 10.93
MPH 120
|