The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 09-24-2013, 08:37 PM

I plan to paint the whole motor except for the heads once I get it home and cleaned up. I painted the back plastic of the alternator RED!That's what gave me the idea to paint the fan blades red!
The picture of me holding the coil wiring it's all dirty and I wiped it off 2 but it just looks nasty to me. Is that covering heat insulated are will regular black tape with conduit be OK?
That's it for tonight I'm done. Got to get the motor tomorrow and close up the pool so it may not get nothing done...yea right!

09-24-2013, 08:37 PM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 2003 LSx swap thread...here we go I plan to paint the whole motor except for the heads once I get it home and cleaned up. I painted the back plastic of the alternator RED!That's what gave me the idea to paint the fan blades red! The picture of me holding the coil wiring it's all dirty and I wiped it off 2 but it just looks nasty to me. Is that covering heat insulated are will regular black tape with conduit be OK? That's it for tonight I'm done. Got to get the motor tomorrow and close up the pool so it may not get nothing done...yea right! Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.