The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Fastest32 · 10-01-2013, 04:37 PM

Take the upper ball joint loose, leave the nut on and smack the spindle with a hammer til it busts loose. Set a jack under the lower control arm, jack it up a tad to remove the nut, and slowly lower the jack. Make sure the truck is up in the air enough so that the lower arm has enough travel to get the spring out and not get the jack stuck.

10-01-2013, 04:37 PM	#6
Fastest32 Registered User Join Date: Nov 2009 Location: Austin Texas Posts: 370	Re: 64 cut spring plus 2 1/2 lowing spindles Take the upper ball joint loose, leave the nut on and smack the spindle with a hammer til it busts loose. Set a jack under the lower control arm, jack it up a tad to remove the nut, and slowly lower the jack. Make sure the truck is up in the air enough so that the lower arm has enough travel to get the spring out and not get the jack stuck. __________________ BaBaBooey BaBaBooey GO SPURS GO!!!