The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TATTOO2131 · 10-02-2013, 03:51 PM

The tires and rims on it now are 16" with a tire width of 10" they are just mock up rims. If my calculations are correct I should have approx 3" clearance between the top of tire and the underside of the front fender after the 20"'s are on. The tire width I will be running on the front will be 10.5" and on the rear 12.25"

10-02-2013, 03:51 PM	#13
TATTOO2131 Registered User Join Date: Jul 2013 Location: brookings Posts: 52	Re: 65 panel crown vic front end swap update The tires and rims on it now are 16" with a tire width of 10" they are just mock up rims. If my calculations are correct I should have approx 3" clearance between the top of tire and the underside of the front fender after the 20"'s are on. The tire width I will be running on the front will be 10.5" and on the rear 12.25"