The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

PrimeredThunder · 12-08-2003, 10:53 PM

if it's a coil truck you need to order or make your own since there is only one U-bolt per side. The U bolt runs over the axle, through the bock and the trailing-arm then bolts on the bottom. I've got a set of blocks that are a bit over 2" that i ran on my 72' with no problems...I dont need them, PM me if your interested.
Kenny

12-08-2003, 10:53 PM	#3
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	if it's a coil truck you need to order or make your own since there is only one U-bolt per side. The U bolt runs over the axle, through the bock and the trailing-arm then bolts on the bottom. I've got a set of blocks that are a bit over 2" that i ran on my 72' with no problems...I dont need them, PM me if your interested. Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon