The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rubble · 10-07-2013, 04:05 PM

If that A833 was behind a 6.2 it should bolt up fine.I pulled one from a 85K10 with a 305 last year & put behind my 6.2 with no troubles.It's a nicer tranny to shift (short throws) than a 465 plus you get OD. One draw back is higher 1st gear,but if needed you can start out in low range too.I got reading your post again,if the shifter is on top it's not a A833.they are a side loader.

10-07-2013, 04:05 PM	#5
Rubble Registered User Join Date: Feb 2012 Location: Big Valley. Alberta Posts: 674	Re: Sm465 to a833 swap If that A833 was behind a 6.2 it should bolt up fine.I pulled one from a 85K10 with a 305 last year & put behind my 6.2 with no troubles.It's a nicer tranny to shift (short throws) than a 465 plus you get OD. One draw back is higher 1st gear,but if needed you can start out in low range too.I got reading your post again,if the shifter is on top it's not a A833.they are a side loader. __________________ 1977 Chev C30 454/465/14ff DRW 1974 Chev C20.350/465/14ff " Rock n Roll ain't noise pollution"