The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

clapage6 · 10-07-2013, 10:14 PM

yep, the map sensor is a black rectangle shaped sensor that should have i believe a 3pin or maybe even 5pin plug into it and a vac line as well

oh and with the vac lines unplugged i think you should not worry about just yet.....i THINK ha..

try unplugging said map sensor and see what happens, should idle decent but sometimes it wont matter and will still need to be tested, there should be a bunch of write ups online to test it... in my only experience with it, it idled with it unplugged and would die when plugged-in so I replaced it.

10-07-2013, 10:14 PM	#6
clapage6 Registered User Join Date: Aug 2013 Location: San Diego Posts: 111	Re: Starts Fine and Stalls yep, the map sensor is a black rectangle shaped sensor that should have i believe a 3pin or maybe even 5pin plug into it and a vac line as well oh and with the vac lines unplugged i think you should not worry about just yet.....i THINK ha.. try unplugging said map sensor and see what happens, should idle decent but sometimes it wont matter and will still need to be tested, there should be a bunch of write ups online to test it... in my only experience with it, it idled with it unplugged and would die when plugged-in so I replaced it.